The Booster Power Supply (BPS) is a UL 864, 9th Edition listed power supply. It is a 24 Vdc filtered-regulated, and supervised unit that can easily be configured to provide additional notification appliance circuits (NACs) or auxiliary power for Mass Notification/Emergency Communication (MNEC), as well as life safety, security, and access control applications.

The BPS contains the circuitry to monitor and charge internal or external batteries. Its steel enclosure has room for up to two 10 ampere-hour batteries. For access control-only applications, the BPS can support batteries totaling up to 65 ampere-hours in an external enclosure.

The BPS has four Class B (convertible to two Class A) NACs. These can be activated in one or two groups from the BPS’s unique dual input circuits. The BPS is available in 6.5 or 10 ampere models. Each output circuit has a capacity of three amperes; total current draw cannot exceed the unit’s rating.

AC Line Voltage                                       :        120VAC or 220-240VAC 50/60Hz nominal 10A max total all NACs

Notification Appliance Circuit Ratings         :        3.0A max. per circuit @ 24Vdc                                                

Trouble Relay                                           :        2 Amps @ 30Vdc

Auxiliary Outputs                                      :         Four configurable outputs replace NACs 1, 2, 3 or 4. as auxiliary                                                                                outputs and 200 mA dedicated auxiliary. (See note 2.)

Input Current (from an existing NAC)           :         3mA @ 12Vdc, 6mA @ 24Vdc

Booster Internal Supervisory Current           :         70mA + 35 mA for each circuit set to AUX

Booster Internal Alarm Current                    :          270mA

Signature Mounting Space                          :          Accomodates three two-gang modules.

Terminal Wire Gauge                                  :          18-12 AWG

Relative Humidity                                       :          0 to 93% non condensing @ 32°C

Temperature Rating                                    :           32° to 120°F (0° to 49°C)

NAC Wiring Styles                                      :           Class A or Class B

Output Signal Rates                                    :           Continuous, California rate, 3-3-3 temporal,..

Ground Fault                                               :           Detection Enable or Disable via jumper

Agency Listings                                           :           UL, ULC, CSFM

https://drive.google.com/uc?export=download&id=0ByFO3CJFjH7FdldSNXNkcmh2WFU